v0.4.11 2026-02-09:
-------------------

* Fixed Gate and DExp gain sign
* Added dynamics result to metering info

v0.4.10 2025-11-05:
-------------------

* Fixed dynamics implementation
* Added mutex for MCP4131/HC595/HC165 access

v0.4.9 2025-10-10:
------------------

* Fixed handling No-Module situations
* Fixed 4051 default enabled state
* Fixed setting enable bit explicitly
* Fixed setting mute bit explicitly

v0.4.8 2025-04-02:
------------------

* Fixed NodeInfoResponse with node specifics

v0.4.7 2025-01-13:
------------------

* Fixed TB DIM bit inversed
* Fixed MCP offset to 4

v0.4.6:
-------

* Fixed NodeInfoResponse with node specifics
* Fixed TbCfDim is active low

v0.4.4 2024-10-29:
------------------

* Fixed very audio safe/ear friendly power-on-reset state
* Fixed DAC values for VCA

v0.4.3 2024-07-30:
------------------

* Fixed metering over full ADC range

v0.4.2 2024-04-29:
------------------

* Fixed adc2metering with -6dB limit

v0.4.1 2024-06-24:
------------------

* Fixed AUX Pre/Post inverted

v0.4.0 2024-06-04:
------------------

* Added AD-Target select enable

v0.3.2:
-------

* Changed Improved Auron2 inputs state

v0.3.1:
-------

* Fixed CM119 USB Powered State signalling

v0.3.0:
-------

* Added CM119-powered indicator
* Added NonStop handling on Auron2

v0.2.4:
-------

* Fixed again the correct Slot2 source order
* Fixed Correct Slot2 source order
* Added Show 'muted' is display on VcaMute

v0.2.3:
-------

* Fixed support for VcaGain
* Fixed ording of Slot2 channels

v0.2.2:
-------

* Fixed DAC SEL0-2 bit order
* Fixed EQ/DYN update immediately
* Fixed EQ display update after change

v0.2.0:
-------

* Added Auron-[12]_Rev_B support
* Added VoipConnect
* Changed Clipping is handled by `auron-engine`

v0.1.1:
-------

* Fixed Application reads not all CAN messages from rx fifo buffer,
* Fixed OLED display introduces lot of noise on GND line,
* Fixed Fader control sends fader moved after PID control has finished
* Fixed PID control parameters for faders
* Fixed push of encoder[0] doesn't work
* Changed latest CAN-bus changes
* Changed CAN RX buffer size doubled,
* Changed Read switches slower (40ms instead of 10ms)
* Changed switched from classic CAN to CAN-FD to be able to send more than 8 data bytes

v0.1.0:
-------

* First version with bootloader support