Differences

This shows you the differences between two versions of the page.

--- axumsettings:start [2019/07/22 09:06] – support
+++ axumsettings:start [2024/02/05 23:12] – Added PDF jeroenbol
@@ Line 1: / Line 1: @@
 =====Multiple Axum settings=====
 \\
-**__Question:__** How can I move the Motorfaders by pressing a button? \\
+^**__Question:__** How can I configure my Axum to control Aircast?^
+|**__Answer:__** Link: [[axumaircast:start|follow the instructions on this page]]|
 \\
-**__Answer:__** Link: [[#motorfader|follow the instructions on this page]] \\
+^**__Question:__** How can I move the Motorfaders by pressing a button?^
+|**__Answer:__** Link: [[axumsettings:start#motorfader|follow the instructions on this page]]|
 \\
-**__Question:__** How can I add the Source gain function to other cards then the MicAD card? \\
+^**__Question:__** How can I add the Source gain function to other cards then the MicAD card?^
+|**__Answer:__** Link: [[axumsettings:start#gain|follow the instructions on this page.]]|
 \\
-**__Answer:__** Link: [[#gain|follow the instructions on this page]] \\
+^**__Question:__** How can I add the Destination gain function to an output card?^
+|**__Answer:__** Link: [[axumsettings:start#gain|follow the instructions on this page.]]|
 \\
+^**__Question:__** How can I change the color of the LED's in the switches?^
+|**__Answer:__** Link: [[axumsettings:start#color|follow the instructions on this page.]]|
+\\
+^**__Question:__** How can I configure an insert function?^
+|**__Answer:__** Link: [[axumsettings:start#insert|follow the instructions on this page.]]|
+\\
+^**__Question:__** How can I configure an aux function?^
+|**__Answer:__** Link: [[axumsettings:start#aux|follow the instructions on this page.]]|
+\\
+^**__Question:__** How can I configure a headphone Split function?^
+|**__Answer:__** Link: [[axumsettings:start#split|follow the instructions on this page.]]|
+\\
+^**__Question:__** How can I configure a preset to switch to Non Stop mode?^
+|**__Answer:__** Link: [[axumsettings:start#nonstop|follow the instructions on this page.]]|
+\\
+^**__Question:__** How can I configure Talkback?^
+|**__Answer:__** Link: [[axumsettings:start#talkback|follow the instructions on this page.]]|
 \\
------
 \\
 -----
@@ Line 27: / Line 47: @@
 \\
 =====Gain=====
+\\
+===Source Gain===
 \\
 {{ :axumsettings:source_gain_at_line_or_aes_input_card.jpg?direct |}}
 \\
-The source gain can be setup like in this example\\
+This example shows how the source gain can be added to other cards then the MicAD.\\
+\\
+===Destination Gain===
+\\
+{{:axumsettings:axumadddestinationlevel1.png?direct|}}
+\\
+This example shows how the destination gain can be added to output cards.\\
+\\
+{{:axumsettings:axumadddestinationlevel2.png?direct|}}
+\\
+The level setting will now be available at the Destination configuration.\\
 \\
 -----
 \\
-Go back to the [[SupAxum:start|Axum]] support page.\\
+=====Color=====
+\\
+{{ :axumsettings:ledcolour.png?direct |}}
+\\
+By changing the __"Switch x.x on color"__ or __"Switch x.x off color"__ to __1 = Green__, __2 = Red__ or __3 = Orange__ you can change it's color. Setting it to __0__ wil switch it __"Off"__.\\
+\\
+-----
+\\
+=====Insert=====
+\\
+{{ :axumsettings:insert1.png?direct |}}
+\\
+Create an output that sends the __"Mic 1"__ to the __"Left"__ output only.\\
+\\
+Create a second output that sends the __"Mic 2"__ to the __"Right"__ output only.\\
+\\
+These can be connected to the inputs or your effect equipment.\\
+\\
+{{ :axumsettings:insert2.png?direct |}}
+\\
+Create an __"Insert"__ input that picks the __"Left"__ and __"Right"__ channel from the same __"Slot x ch x"__ input to make it a stereo input.\\
+\\
+Create a second __"Insert"__ input that picks the __"Left"__ and __"Right"__ channel from the other same __"Slot x ch x"__ input stereo input.\\
+\\
+These can be connected to your effect outputs.\\
+\\
+-----
+\\
+=====Aux=====
+\\
+{{:axumsettings:aux01b.png?direct|}}
+\\
+At the "Source configuration" you'll have to rename a desired input as "Aux Return".\\
+\\
+{{:axumsettings:aux02.png?direct|}}
+\\
+At the "Destination configuration" you'll have to rename a desired output as "Aux Send".\\
+\\
+{{:axumsettings:aux03.png?direct|}}
+\\
+At the "Module configuration" of each module you can set the "Aux1" to "On" if you want to switch the "Aux1" in a preset.\\
+\\
+It is also possible to manually set the "Aux1" to "On" / "Off" at the "Control surface".\\
+\\
+{{:axumsettings:aux04.png?direct|}}
+\\
+It is possible to use the "Aux Return" as "Extern source" this way it is only available at the "Cue" section of the CRM and Studio outputs.\\
+\\
+{{:axumsettings:aux05.png?direct|}}
+\\
+It is also possible to hard route it to a specific output.\\
+\\
+-----
+\\
+=====Split====
+\\
+{{ :axumsettings:split_out_1.jpg?direct |}}
+\\
+Create an output (Line or AES) with on the Left side the PFL and the right side no output. Now create a second line with the Left side no ouput and the right side the Prog as an ouput.\\
+\\
+Connect this output to an input.\\
+\\
+{{ :axumsettings:split_out_2.jpg?direct |}}
+\\
+When you configure this input as an External input it can be directly routed to the headphone.\\
+\\
+-----
+\\
+=====Nonstop====
+\\
+{{:axumsettings:01moduleassignment.png?direct |}}
+\\
+At the Module assignment page configure the prefered unused modules to work for the desired Console 1.\\
+\\
+{{:axumsettings:02consoleconfigurationmodule32preset4linein8on.png?direct |}}
+\\
+At the module configuration create a preset with the Non stop input which also sets on the Program bus for this input.\\
+\\
+{{:axumsettings:03consoleconfigurationmodule32value.png?direct |}}
+\\
+Let this preset also set on the Module On function and it's value.\\
+\\
+{{:axumsettings:02consoleconfigurationmodulexxpreset4off.png?direct |}}
+\\
+Turn off all other module inputs for this preset.\\
+\\
+{{:axumsettings:04surfaceconfigurationswitch.png?direct |}}
+\\
+Create a button which switches on the Non stop preset or let it switch by a GPI.\\
+\\
+=====Talkback====
+\\
+{{:axumsettings:axum_talkback_configure_english.pdf}}
+\\
+-----
+\\
+[[https://www.dnrbroadcast.com/support-related|Support Request]]\\
+\\
+[[start:|{{:iconhome.png?100|Home}}]][[SupAxum:start|{{:iconback2.png?100|Back}}]]
 \\