Differences

This shows you the differences between two versions of the page.

--- lyratripping:start [2019/02/06 09:40] – support
+++ lyratripping:start [2020/06/12 11:37] – support
@@ Line 1: / Line 1: @@
 **__Question:__** My lyra is tripping on starting up, what can I do about this?\\
 **__Answer:__** Link: [[lyratripping:start|follow the instructions on this page]]\\
+\\
 check the powersupply  has to be between 5,1 and 5,25V ( 5,1 is default)\\
+\\
 Measure on the white 3P molexconnector on top of the Core.\\
+\\
 Check if  the Molex connector- modification is done. From 2004 and later the powersupply is wired directly without connectors to the DIG PCB this to avoid power fluctuations.\\
+\\
 {{ :lyratripping:lyrapsumod.jpg?nolink |}}\\
+\\
 It's also possible that the capacitors in the power supply part are getting defective.\\
+\\
 These can be renewed if done really carefully and with the right equipment.\\
+\\
 It is also possible to send the unit in for a repair and complete firmware update.\\
+\\
-Replace the 7 SMD 220u 10v. capacitors at the Core pcb and the few smd capacitors at the dig pcb the 4 near the large capacitors.\\
+Replace the 7 SMD 220u 10v. capacitors at the Core pcb.\\
+\\
-[[SupLyra:start|Go back to the Lyra wikipage.]]
+[[https://www.d-r.nl/support-request.html|Support Request]]\\
+\\
+[[start:|{{:iconhome.png?100|Home}}]][[SupLyra:start|{{:iconback2.png?100|Back}}]]