Differences

This shows you the differences between two versions of the page.

--- aircastwebstation:start [2018/12/12 09:24] – support
+++ aircastwebstation:start [2022/01/25 16:36] (current) – support
@@ Line 22: / Line 22: @@
   * Then hold down the ON button till it starts blinking to activate the __Voice Track__ bus.
   * Press the on button twice to return to the normal ON state.
-  * Turn the __Aux__ potentiometer (Full open) of the channel and the __Aux Send__ (2 O'Clock) (Under the VU meter) to see where the __Aux__ signal comes in.
+  * The last one is also the __Voip__
-  * The last one is the __On Air__
 {{youtube>1mD7JKfRlD0}}
@@ Line 44: / Line 43: @@
 Also the Program recorder, shoutcast stream server are visible options so they'll have to be added in the Configuration tool.\\
-{{ :supaircast:24_configuration_airlab_rs232.png?direct |}}\\
+[[start:|{{:iconhome.png?100|Home}}]][[SupWebstation:start|{{:iconback2.png?100|Back}}]][[aircastwebstation2:start|{{:iconforw.png?100|please follow the steps at the second page}}]]
-To use the Fader starts of an Airlab you'll also need to set the Serial port settings to the right Baud rate.\\
-[[aircastwebstation2:start|Next page (Easy setup manual Aircast with Webstation 2/3]]