Differences

This shows you the differences between two versions of the page.

--- supvisualradiocontrolmanual:start [2022/08/22 14:23] – [3.2. There are no scenes available] jeroenbol
+++ supvisualradiocontrolmanual:start [2022/10/21 10:18] (current) – Add workaroud for vMix. jeroenbol
@@ Line 226: / Line 226: @@
 When two or more sources are active and have metering levels above their threshold (two or more speakers interrupting each other), the `Scheduling priority` helps deciding who will actually receive the focus.
-A higher value for the priority means that it will be more likely to be picked.
+A lower value for the priority means that it will be more likely to be picked.
-Priorities can be negative as well, if that helps your thinking process.
+Think of the Top-40, the best is always at 1.
 When two, or more, sources are active and have equal priorities, the first scene as it is configured and appears in the list will be activated.
@@ Line 314: / Line 314: @@
   * the ''Visual Radio Control'' software is no longer running the background, please launch the software again, or
-  * the ''Visual Radio Control'' is running on an other PC or port other than the standard. In this case, please correct the information in the URL box with the proper value. The format should still be `ws://<hostname>:<port>/api` for proper working of this web-page. After changing the value, please click the 'Apply' button to try and establish the connection.
+  * the ''Visual Radio Control'' is running on an other PC or port other than the standard. In this case, please correct the information in the URL box with the proper value. The format should still be <code>ws://<hostname>:<port>/api</code> for proper working of this web-page. After changing the value, please click the 'Apply' button to try and establish the connection.
 When more items are shown in the list, but they do not have green check-marks with them, please check if their corresponding values are correct.
@@ Line 325: / Line 325: @@
 ''Windows Defender'' reports virus during/after upgrading.
 Uninstall software and install, rather then upgrade.
+==== 3.4. I have vMix, not OBS Studio ====
+At this moment Camcon / Visual Radio Control has only support for OBS Studio.
+In order to have support for customers with vMix software, it is possible to have a little workaround to combine the two.
+Setup OBS Studio to output to a network video stream. Configure this stream with little to none compression and little to none output buffering. This to reduce any additional unwanted latency.
+Now setup OBS Studio to control the cameras that are needed and setup Visual Radio Control as normal.
+Configure vMix to pick up the network video stream.
 ===== Appendix A. Setting up the Camcon Software =====