**__Question:__** How do I setup Aircast to work with my Airlab \\
**__Answer:__** [[aircastairlab:start|please follow the steps at this link]]\\

===== Easy setup manual Aircast with an Airlab 3/3 =====

{{ :aircastairlab3:15_configuration_remote_control_airlab.png?direct |}}
To control Aircast with you’re D&R mixer you’ll have to add the Remote Control function of the specific mixer.\\

{{ :supaircast:16_configuration_remote_control_player_1_airence.png?direct |}}\\
You’ll have to tell Aircast that Player 1 uses the channel USB 1.\\

{{ :supaircast:17_configuration_remote_control_player_2_airence.png?direct |}}\\
Player 2 uses the channel USB 2\\

{{ :supaircast:18_configuration_remote_control_player_3_airence.png?direct |}}\\
and Player 3 uses the channel USB 3 this way the Fader starts will work fort his channel.

{{ :supaircast:19_configuration_remote_control_cartwall_airence.png?direct |}}\\
For the Cartwall we use the 8 buttons in Row A, it is also possible to change the colors of the Led’s.

{{ :supaircast:20_configuration_remote_control_cartwall_airence_other_buttons.png?direct |}}\\
For the other switches that arent used for the Cartwall players we can configure different fucntions.\\
Keep in mind that the switches in Row A (1, 3, 5, 7, 9, 11, 13, 15) are already in use and have to be empty.\\

{{ :supaircast:21_configuration_remote_control_cartwall_airence_advanced_ports.png?direct |}}\\
Be sure that the Port numbers correspond with the Port numbers in Airlite Control

{{ :supaircast:22_configuration_remote_control_cartwall_airlab_advanced_ports.png?direct |}}\\
An Airlab sends it's Fader starts trough Serial port.\\

{{ :supaircast:23_configuration_remote_control_cartwall_airlab_advanced_fader_starts.png?direct |}}\\
These have to be configured on the Airlab his Channel positions.\\

[[https://www.dnrbroadcast.com/support-related|Support Request]]\\
\\
[[SupAircast:start|Return to the Aircast main page]]
\\
[[start:|{{:iconhome.png?100|Home}}]][[SupAirlab:start|{{:iconback2.png?100|Back}}]][[aircastairlab2:start|{{:iconback1.png?100|Back}}]]