**__Question:__** How do I setup Aircast to work with my Webstation \\
**__Answer:__** [[aircastwebstation:start|please follow the steps at this link]]\\

===== Easy setup manual Aircast with an Webstation 3/3 =====

{{ :aircastwebstation3:15_configuration_remote_control_webstation.png?direct |}}
To control Aircast with you’re D&R mixer you’ll have to add the Remote Control function of the specific mixer.\\

{{ :aircastwebstation3:16_configuration_remote_control_player_1_webstation.png?direct |}}
You’ll have to tell Aircast that Player 1 uses the channel USB 1.\\

{{ :aircastwebstation3:19_configuration_remote_control_player_2_webstation.png?direct |}}
Player 2 uses the channel USB 2\\

{{ :aircastwebstation3:18_configuration_remote_control_player_3_webstation.png?direct |}}
and Player 3 uses the channel USB 3 this way the Fader starts will work fort his channel.

{{ :aircastwebstation3:19_configuration_remote_control_cartwall_webstation.png?direct |}}
For the Cartwall we use the 8 buttons in Row A, it is also possible to change the colors of the Led’s.

{{ :aircastwebstation3:20_configuration_remote_control_cartwall_webstation_other_buttons.png?direct |}}
For the other switches that arent used for the Cartwall players we can configure different fucntions.\\
Keep in mind that the switches in Row A (1, 3, 5, 7, 9, 11, 13, 15) are already in use and have to be empty.\\

{{:aircastwebstation3:encoderinputswitch.jpg?direct|}}
When you configure ENCODEr INPUT xxx ON at the Non-Stop options it also switches the encoder input.\\

{{ :aircastwebstation3:21_configuration_remote_control_cartwall_webstation_advanced_ports.png?direct |}}
Be sure that the Port numbers correspond with the Port numbers in Webstation Control

[[https://www.dnrbroadcast.com/support-related|Support Request]]\\
\\
[[start:|{{:iconhome.png?100|Home}}]][[SupWebstation:start|{{:iconback2.png?100|Back}}]][[aircastwebstation2:start|{{:iconback1.png?100|Back}}]]
\\