\\
^**__Question:__** How can I configure my GSM Hybrid GPO to Alert on my Axum and GPI to pickup/hangup?^
|**__Answer:__** Link: [[axumgsmhybridremote:start|follow the instructions on this page.]]|
\\
{{:axumstudioremote:micad.jpg?600|}}\\
First you'll need to set the jumpers for one GPO to GPIO the other one remains GPO.\\
For the GPIO Jack A which is GPI7 on a patch panel you'll need to change the bottom row of jumpers to 1-2 & 4-5.\\
The top row remains at 2-3 & 5-6 which is GPO8.\\
\\
{{:axumgsmhybridremote:gsmhybridgpio.png?600|}}\\
At a card where you connected the GSM Hybrid to you'll need to configure a GPO to switch when Start/Stop is triggered.\\
You'll also need to configure a GPI to trigger the Line inputs Alert function.\\
\\
{{:axumgsmhybridremote:gsmhybridringpickup.png?600|}}\\
To pick up or hang up the GSM Hybrid you'll need to configure a switch for Start and Stop function.\\
\\
{{:axumgsmhybridremote:gsmhybridringalert.png?600|}}\\
Now you can configure a desired LED or meters icon to input and it's Alert function to go on or blink when the GSM Hybrid rings.\\

\\
[[https://www.dnrbroadcast.com/support-related|Support Request]]\\
\\
[[start:|{{:iconhome.png?100|Home}}]][[SupAxum:start|{{:iconback2.png?100|Back}}]]
\\