**__Question:__** How can I configure User Levels in the Axum? \\
**__Answer:__** Link: [[axumuserlevel:start|follow the instructions on this page.]] \\
\\
=====How to configure User Levels in the Axum======
\\
{{ :axumuserlevel:download_backup.png?direct |}}\\
It is recommended to first Download a backup of your existing settings before you start changing settings!\\
This way you can always go back to a previous configuration.\\
\\
{{ :axumuserlevel:t_10600391-chipcard_20181128144417.png?direct |}}
I think the easiest way is to switch user levels with different chip cards.\\
\\
{{ :axumuserlevel:console1-4-users.png?direct |}}
First of all be sure to create an Administrator account that can control everything.\\
This can be done at the users page shown in constol1-4-users.png\\
\\
{{ :axumuserlevel:user_levels.png?direct |}}
The username and password can then be written to the chipcard for example so you can switch to the user that can use everything.\\
\\
{{ :axumuserlevel:console1-4_surface_config_node_uicrmp-1.png?direct |}}
At the Surface configuration you can now disable options for Operators and Supervisor.\\
\\
{{ :axumuserlevel:console1-4_surface_config_node_uicrmp-2.png?direct |}}
__At the UI-CRMP be sure that the chipcards options (Number 1086 to 1088) are available to all users.__ \\
__If you set this to Not available you won't be able to login with the chipcard in that situation.__ \\
\\
{{ :axumuserlevel:console1-4_surface_config_node_uicrmp-1.png?direct |}}
The Supervisor can be configured with less options to Yes.\\
\\
{{ :axumuserlevel:console1-4_surface_config_node_uicrmp-2.png?direct |}}
The Operator can then be configured less options then the Supervisor.\\
\\
{{ :axumuserlevel:console1-4_surface_config_node_ui-4fbp-3.png?direct |}}
The Idle row is the situation without any users logged in, unknown for users that have a not matching name and password.\\
\\
{{ :axumuserlevel:console1-4_surface_config_node_ui-4fbp-4.png?direct |}}
By default the settings for all users are set to Y(es).\\
\\
=====Once again be very careful cause setting the wrong options can lock up everything.=====
\\
=====And be sure that you'll configure the 3 chipcard functions as available for all users!!=====
\\
{{ :axumuserlevel:console1-4_surface_config_node_uicrmp-2.png?direct |}}
__At the UI-CRMP be sure that the chipcards options (Number 1086 to 1088) are available to all users.__ \\
__If you set this to Not available you won't be able to login with the chipcard in that situation.__ \\
\\
[[https://www.dnrbroadcast.com/support-related|Support Request]]\\
\\
[[start:|{{:iconhome.png?100|Home}}]][[SupAxum:start|{{:iconback2.png?100|Back}}]]
\\