Each Axum card's channel has it's own jumper to change from GPIO with 5 volt TTL (that is used for a Studio remote) to 2 potential free GPO ports.\\
\\
{{ :faderstartinstr:axum_gpo_settings_a.png?direct |}}\\
\\
\\
The settings can be found in this document.\\
\\
{{:faderstartinstr:axum_gpo_settings.pdf|}}\\
\\
[[faderstartinstr:start|Return to Fader start instructions]]\\
\\
\\
[[https://www.dnrbroadcast.com/support-related|Support Request]]\\
\\
Go back to the [[SupAxum:start|Axum]] support page.\\

\\