D&R Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
**__Question:__** What are the differences in versions? \\
**__Answer:__** Link: [[airmateversion:start|please read the info at this link]]

^  Version  ^  Airmate PCB info and modifications  ^
|  V.1  |  Airmate 8 triple channel (Grey or Silver front, single or double master fader)  |
^  ^  ^
|  USB V.2  |  Airmate 4x triple, 2x USB, 2x Telco, added Mic insert and Stereo Aux  |
^  ^  ^
|  USB V.3  |    |
^  ^  ^
|  USB V.4  |  Well Buying switches with LED and white cap to replace switches with separate ON and CUE LED  |
|    |  Leaded > SMD  |
^  ^  ^
|  USB V.5  |  Added Digital option at Master and option to connect Master output with Jack  |
^  ^  ^
|  USB V.6  |  Switching Power Supply  |
^  ^  ^
|  USB V.7  |  Airmate Telco R17, R18 high power  |
^  ^  ^
|  USB V.8  |  Airmate Telco R17, R18 high power, Higher voltage capacitor Phantom Circuit  |
^  ^  ^
|  USB V.9  |  Airmate Telco R17, R18 600mw leaded  |
^  ^  ^
|  USB V.10  |  Airmate Telco R17, R18 600mw leaded or SMD array multiple high power resistors  |
|    |  Airmate Telco Z6 > 10 volt zener diode  |
|    |  Airmate Telco C5, C40 > 200 volt 4n7  |
^  ^  ^
|  USB V.10  |  Airmate with Serial number 191001xx-V10 which means produced 2019-10-01 or later  |
|    |  Second USB channel receives Auxilary send (Aux to USB Modification)  |

\\
[[https://www.dnrbroadcast.com/support-related|Support Request]]\\
\\
[[start:|{{:iconhome.png?100|Home}}]][[SupAirmate:start|{{:iconback2.png?100|Back}}]]
\\