Differences

This shows you the differences between two versions of the page.

--- axumstudioremote:start [2019/04/30 10:04] – created support
+++ axumstudioremote:start [2022/07/18 09:17] (current) – support
@@ Line 1: / Line 1: @@
 **__Question:__** How can I configure my Studio Remotes in the Axum? \\
 **__Answer:__** Link: [[axumstudioremote:start|follow the instructions on this page.]] \\
+\\
 To connect a Studio remote to your Axum you'll have to change the Jumpers on the MicAD card to GPIO instead of GPO settings.\\
+\\
 {{ :axumstudioremote:micad.jpg?direct |}}
+\\
 Set the Jumpers to the 1-2 and 4-5 Jumper positions.\\
+\\
 Then you can configure the functions of this GPIO's.\\
+\\
 {{ :axumstudioremote:console1-4_rack_config-mic1b.png?direct |}}
+\\
 In this example the Studio remote will show when the user presses the Cough and Comm button.\\
 An other option can be to show the Redlight connected to the Microphone input.\\
+\\
 Setting 1027 - 1034 are the GPI settings and react to the buttons of the Studio Remote.\\
 Setting 1051 - 1058 are the GPO settings and will make the LED's of the Studio Remote go ON.\\
+\\
+[[https://www.dnrbroadcast.com/support-related|Support Request]]\\
+\\
+[[start:|{{:iconhome.png?100|Home}}]][[SupAxum:start|{{:iconback2.png?100|Back}}]]
+\\