lyratripping:start
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
lyratripping:start [2019/02/06 09:40] – support | lyratripping:start [2022/07/18 09:28] (current) – support | ||
---|---|---|---|
Line 1: | Line 1: | ||
**__Question: | **__Question: | ||
**__Answer: | **__Answer: | ||
+ | \\ | ||
check the powersupply | check the powersupply | ||
+ | \\ | ||
Measure on the white 3P molexconnector on top of the Core.\\ | Measure on the white 3P molexconnector on top of the Core.\\ | ||
+ | \\ | ||
Check if the Molex connector- modification is done. From 2004 and later the powersupply is wired directly without connectors to the DIG PCB this to avoid power fluctuations.\\ | Check if the Molex connector- modification is done. From 2004 and later the powersupply is wired directly without connectors to the DIG PCB this to avoid power fluctuations.\\ | ||
+ | \\ | ||
{{ : | {{ : | ||
+ | \\ | ||
It's also possible that the capacitors in the power supply part are getting defective.\\ | It's also possible that the capacitors in the power supply part are getting defective.\\ | ||
+ | \\ | ||
These can be renewed if done really carefully and with the right equipment.\\ | These can be renewed if done really carefully and with the right equipment.\\ | ||
+ | \\ | ||
It is also possible to send the unit in for a repair and complete firmware update.\\ | It is also possible to send the unit in for a repair and complete firmware update.\\ | ||
- | + | \\ | |
- | Replace the 7 SMD 220u 10v. capacitors at the Core pcb and the few smd capacitors at the dig pcb the 4 near the large capacitors.\\ | + | Replace the 7 SMD 220u 10v. capacitors at the Core pcb.\\ |
- | + | \\ | |
- | [[SupLyra: | + | [[https:// |
+ | \\ | ||
+ | [[start: | ||
lyratripping/start.1549442431.txt.gz · Last modified: 2019/02/06 09:40 by support