D&R Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
{{:rdj_logo.png?300|}}
\\
^**__Question:__** How do I configure RadioDJ to work with my Webstation, Airlite or Airence?^
|**__Answer:__** Link: [[radiodjconf:start|please follow the steps at this link]]|
\\
{{:radiodjconf:01.jpg?600|}}\\
Click at the wrench in the red square to open the configuration page.\\
\\
{{:radiodjconf:02.jpg?600|}}\\
Click at "OPTIONS" for the Audio configuration.\\
\\
{{:radiodjconf:03.jpg?600|}}\\
Go to the "Sound Cards" tab.\\
\\
{{:radiodjconf:04.jpg?600|}}\\
At the "Sound Cards" tab you can configure all the outputs of RadioDJ.\\
\\
{{:radiodjconf:05.jpg?600|}}\\
The Main 1 output in the Red square is used for the Automation/Non stop player.\\
You can also select the outputs in the Orange square that you like to use for "Monitoring (CUE), Sweeper/VO or Voicetrack.\\
\\
{{:radiodjconf:06b.jpg?600|}}\\
When you scroll down you can select the output for the "Carts" in the Orange square, Aux Players in the Red square and the Audio input in the Blue square.\\
When finished press "Close" in the Green square.\\
\\
{{:radiodjconf:07.jpg?600|}}\\
RadioDJ has to be restarted (Red square) to make the changes have effect.\\
Press "OK" and close RadioDJ and then restart to continue the configuration.\\
\\
[[start:|{{:iconhome.png?100|Home}}]][[playoutoftware:start|{{:iconback2.png?100|Back}}]][[radiodj:start|{{:iconback1.png?100|Back}}]][[radiodjconf2:start|{{:iconforw.png?100|please follow the steps at the second page}}]]