| Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision |
| supairence:start [2021/12/21 14:51] – support | supairence:start [2023/09/14 01:11] – Updated reference to Firware Update Tool jeroenbol |
|---|
| |
| \\ | \\ |
| | ====== Attention ====== |
| | ^ Be carefull due to a hardware change it is NOT possible to combine older versions with units produced after 01-01-2022. ^^^ |
| | | V.10 Main\\ V.10 Extender | 01-01-2022 | POWER SUPPLY CHANGED TO 12 VOLT INSTEAD OF THE EARLIER USED 36 VOLT\\ MAIN V.10 and EXTENDER V.10 ARE NOT COMPATIBLE WITH OLDER VERSIONS. \\ Connecting a older to a newer units will damage the older unit. | |
| | \\ |
| Install as Administrator :!: \\ | Install as Administrator :!: \\ |
| \\ | \\ |
| To set the unit in bootloader mode: | To set the unit in bootloader mode: |
| - Take off the Power off the unit | - Take off the Power off the unit |
| - Hold down the "Encoder" of the "Control surface" | - Hold down the "Encoder" (Data) of the "Control surface" |
| - While holding down the "Encoder" you'll have to "Power on" the unit | - While holding down the "Encoder" (Data) you'll have to "Power on" the unit |
| - Release the "Encoder" after 5 seconds | - Release the "Encoder" (Data) after 5 seconds |
| - The Unit will show some random LED's as there is no software loaded at this moment | - The Unit will show some random LED's as there is no software loaded at this moment |
| \\ | \\ |
| | If you receive a Error 740, it means that it requires elevation to run.\\ |
| | Meaning you must run it as administrator.\\ |
| | Try right clicking the command prompt and running it as administrator.\\ |
| \\ | \\ |
| ^ Needed Software ^ Windows 7, 8, 10\\ {{:compatibility-windows-7.jpg?60|}}{{:compatibility-windows-8.jpg?60|}}{{:compatibility-windows-10.jpg?60|}} ^ Windows 11 {{:compatibility-windows-11.jpg?60|}} ^ MAC OS X {{:compatibility-mac.jpg?60|}} ^ Linux\\ {{:compatibility-linux.jpg?75|}} ^ Manual ^ Info ^ | ^ Needed Software ^ Windows 7 {{:compatibility-windows-7.jpg?80|}} ^ Windows 8 {{:compatibility-windows-8.jpg?80|}} ^ Windows 10 {{:compatibility-windows-10.jpg?80|}} ^ Windows 11 {{:compatibility-windows-11.jpg?80|}} ^ MAC OS X {{:compatibility-mac.jpg?80|}} ^ Linux\\ {{:compatibility-linux.jpg?90|}} ^ Manual\\ & Info ^ |
| | Firmware Updatetool | [[http://www.mambanet.org/wiki/dokudata/software/Firmware Updatetool v4.10 - Setup.exe| v4.10]] | N/A | N/A | N/A | [[http://www.mambanet.org/wiki/dokudata/software/Firmware Update v4.1.pdf|PDF]] | [[https://youtu.be/oWNRIsJQvCk|Video AtLibUsbDfu.dll]]\\ <sub>-> Shown as Unknown Device !</sub> | | | Firmware Updatetool | [[http://www.mambanet.org/wiki/dokudata/software/D&R Firmware Update Tool v4.11.0 - Setup.exe| v4.11.0]] (Needs Java 32bits, Visual Studio and driver!) |||| N/A | N/A | [[http://www.mambanet.org/wiki/dokudata/software/Firmware Update v4.1.pdf|PDF]] | |
| | Java 32 bits\\ <sub>(Needed for Firmware update tool) (A)</sub> | [[https://javadl.oracle.com/webapps/download/AutoDL?BundleId=238726_478a62b7d4e34b78b671c754eaaf38ab|Java X86]] | - | - | - | - | - | | | AtLibUsbDfu.dll installer\\ <sub>(Needed for Firmware update tool)</sub> | [[http://www.mambanet.org/wiki/dokudata/software/driver-atmel-installer-x86-7.0.1931.msi|Driver X86]]\\ [[http://www.mambanet.org/wiki/dokudata/software/driver-atmel-installer-x64-7.0.1931.msi|Driver X64]]\\ or [[https://youtu.be/oWNRIsJQvCk|Video AtLibUsbDfu.dll]] <sub>-> Shown as Unknown Device !</sub> |||| - | - | - | |
| | Visual Studio\\ <sub>(Needed for Firmware update tool) (B)</sub> | [[https://aka.ms/vs/16/release/VC_redist.x86.exe|x86]] [[https://aka.ms/vs/16/release/VC_redist.x64.exe|x64]] | - | - | - | - | - | | | Java 32 bits\\ <sub>(Needed for Firmware update tool) (A)</sub> | [[https://javadl.oracle.com/webapps/download/AutoDL?BundleId=238726_478a62b7d4e34b78b671c754eaaf38ab|Java X86]] |||| - | - | - | |
| | Airence Firmware | [[http://www.mambanet.org/wiki/dokudata/software/airence_firmware_v1.5.zip| v1.5]] | - | - | - | [[http://www.mambanet.org/wiki/dokudata/software/Airence Changelog.txt|TXT]] | - | | | Visual Studio\\ <sub>(Needed for Firmware update tool) (B)</sub> | [[http://www.mambanet.org/wiki/dokudata/software/visual-studio-isolated-shell-14.0.23107.10.exe|Visual Studio]] |||| - | - | - | |
| | Airence Meters | [[http://www.mambanet.org/wiki/dokudata/software/Airence Meters v1.9.1 - Setup.exe| v1.9.1 ]]\\ <sub>(FW 1.5)</sub> || [[http://www.mambanet.org//wiki/dokudata/software/Airence Meters v1.9.dmg|v1.9]]\\ <sub>(FW 1.5)</sub> | - | [[http://www.mambanet.org/wiki/dokudata/software/Manual Airence Meters.pdf|PDF]] | [[http://www.mambanet.org/wiki/dokuwiki/doku.php?id=faq:airence|Wiki]] | | | Airence Firmware | [[http://www.mambanet.org/wiki/dokudata/software/airence_firmware_v1.5.zip| v1.5]] |||| - | - | [[http://www.mambanet.org/wiki/dokudata/software/Airence Changelog.txt|TXT]] | |
| | Airence Meters\\ Serial port driver | [[http://www.mambanet.org/wiki/dokudata/software/CDM_v2_12_28_WHQL_Certified_X86_X64.zip|FTDI Driver X86/X64]] || - | - | - | - | | | Airence Meters | [[http://www.mambanet.org/wiki/dokudata/software/Airence Meters v1.9.1 - Setup.exe| v1.9.1 ]]\\ <sub>(FW 1.5)</sub> |||| [[http://www.mambanet.org//wiki/dokudata/software/Airence Meters v1.9.dmg|v1.9]]\\ <sub>(FW 1.5)</sub> | - | [[http://www.mambanet.org/wiki/dokudata/software/Manual Airence Meters.pdf|PDF]]\\ [[http://www.mambanet.org/wiki/dokuwiki/doku.php?id=faq:airence|Wiki]] | |
| ^ Optional Software ^ Windows 7, 8, 10 ^ Windows 11 ^ MAC OS X ^ Linux ^ Manual ^ Info ^ | | Airence Meters\\ Serial port driver | [[http://www.mambanet.org/wiki/dokudata/software/CDM_v2_12_28_WHQL_Certified_X86_X64.zip|FTDI Driver X86/X64]] |||| - | - | - | |
| | Airence Virtual Keyboard Mapper | [[http://www.mambanet.org/wiki/dokudata/software/Airence Virtual Keyboard Mapper v1.3 - Setup.exe|v1.3]]\\ <sub>(FW 1.5)</sub> || - | - | [[http://www.mambanet.org/wiki/dokudata/software/Manual Airence Virtual Keyboard Mapper.pdf|PDF]] | [[http://www.mambanet.org/wiki/dokudata/faq/airence/Keyboard%20Mapper%20Explained.pdf|How it works]] | | ^ Optional Software ^ Windows 7 ^ Windows 8 ^ Windows 10 ^ Windows 11 ^ MAC OS X ^ Linux ^ Manual\\ Info ^ |
| | Airence Virtual Keyboard Mapper\\ <sub>(Service)</sub> | [[http://www.mambanet.org/wiki/dokudata/software/Airence Virtual Keyboard Mapper v1.4 - Setup.exe|v1.4]]\\ <sub>(FW 1.5)</sub> || - | - | [[http://www.mambanet.org/wiki/dokudata/software/Manual Airence Virtual Keyboard Mapper.pdf|PDF]] | ::: | | | Airence Virtual Keyboard Mapper | [[http://www.mambanet.org/wiki/dokudata/software/Airence Virtual Keyboard Mapper v1.3 - Setup.exe|v1.3]]\\ <sub>(FW 1.5)</sub> |||| - | - | [[http://www.mambanet.org/wiki/dokudata/software/Manual Airence Virtual Keyboard Mapper.pdf|PDF]]\\ [[http://www.mambanet.org/wiki/dokudata/faq/airence/Keyboard%20Mapper%20Explained.pdf|How it works]] | |
| | D&R VoIP Connect Button | [[http://www.mambanet.org/wiki/dokudata/software/D&R Voip Connect v1.0.227.0 - Setup.exe|v1.0.227.0]] || - | - | [[http://www.mambanet.org/wiki/dokudata/software/Voip connect.pdf|PDF]] | - | | | Airence Virtual Keyboard Mapper\\ <sub>(Service)</sub> | [[http://www.mambanet.org/wiki/dokudata/software/Airence Virtual Keyboard Mapper v1.4 - Setup.exe|v1.4]]\\ <sub>(FW 1.5)</sub> |||| - | - | [[http://www.mambanet.org/wiki/dokudata/software/Manual Airence Virtual Keyboard Mapper.pdf|PDF]]\\ [[http://www.mambanet.org/wiki/dokudata/faq/airence/Keyboard%20Mapper%20Explained.pdf|How it works]] | |
| | Airence StationPlaylist Plugin <sub>(C)</sub> | [[http://www.mambanet.org/wiki/dokudata/software/Airence StationPlaylist Plugin v1.2.1 - Setup.exe|v1.2.1]] || - | - | [[http://www.mambanet.org/wiki/dokudata/software/Manual Airence StationPlaylist Plugin.pdf|PDF]] | - | | | D&R VoIP Connect Button | [[http://www.mambanet.org/wiki/dokudata/software/D&R Voip Connect v1.0.227.0 - Setup.exe|v1.0.227.0]] |||| - | - | [[http://www.mambanet.org/wiki/dokudata/software/Voip connect.pdf|PDF]] | |
| | Airence SDK | [[http://www.mambanet.org/wiki/dokudata/software/Airence SDK v1.2.zip| v1.2]] || - | - | [[http://www.mambanet.org/wiki/dokudata/software/Airence C library v1.2.pdf|PDF]] | - | | | Airence StationPlaylist Plugin <sub>(C)</sub> | [[http://www.mambanet.org/wiki/dokudata/software/Airence StationPlaylist Plugin v1.2.1 - Setup.exe|v1.2.1]] |||| - | - | [[http://www.mambanet.org/wiki/dokudata/software/Manual Airence StationPlaylist Plugin.pdf|PDF]] | |
| | Channel Configuration | - || - | - | - | [[https://www.youtube.com/watch?v=1mD7JKfRlD0| Video]] | | | Airence SDK | [[http://www.mambanet.org/wiki/dokudata/software/Airence SDK v1.2.zip| v1.2]] |||| - | - | [[http://www.mambanet.org/wiki/dokudata/software/Airence C library v1.2.pdf|PDF]] | |
| | USBdeview | [[http://www.mambanet.org/wiki/dokudata/software/USBstopALLD&R.zip| Remove all D&R batchfile ]]\\ <sub>(put in USBdeview folder)</sub> || - | - | [[https://www.nirsoft.net/utils/usb_devices_view.html|Nirsoft (C)]] | - | | | Channel Configuration | - |||| - | - | [[https://www.youtube.com/watch?v=1mD7JKfRlD0| Video]] | |
| | | USBdeview | [[http://www.mambanet.org/wiki/dokudata/software/USBstopALLD&R.zip| Remove all D&R batchfile ]]\\ <sub>(put in USBdeview folder)</sub> |||| - | - | [[https://www.nirsoft.net/utils/usb_devices_view.html|Nirsoft (C)]] | |
| |
| \\ | \\ |
| |**__Answer:__** Take a look at this picture:| | |**__Answer:__** Take a look at this picture:| |
| |{{:voiptelephoneoptions.jpg?600|}}| | |{{:voiptelephoneoptions.jpg?600|}}| |
| | \\ |
| | ^**__Question:__** How can I connect a (GSM) Hybrid to my Voip channel?^ |
| | |**__Answer:__** Connect the output from the Hybrid to the input of the Voip channel and the Cleanfeed output to the input of your Hybrid. Therefor you need to make a cable from the RJ11 connector to input connector on your hybrid:| |
| | |{{:voip-cleanfeed-to-hybrid.png?800|}}| |
| \\ | \\ |
| ^**__Question:__** How to use the Voip channel in my mixer?^ | ^**__Question:__** How to use the Voip channel in my mixer?^ |
| ^**__Question:__** I want to connect my Fader start to my CD player, Turntable or other player, how do I have to connect this?^ | ^**__Question:__** I want to connect my Fader start to my CD player, Turntable or other player, how do I have to connect this?^ |
| |**__Answer:__** Instructions can be found in this webpage: [[faderstartinstr:start|Fader start instructions]]| | |**__Answer:__** Instructions can be found in this webpage: [[faderstartinstr:start|Fader start instructions]]| |
| | \\ |
| | * [[http://www.mambanet.org/wiki/dokudata/faq/airlite/How to Connect Mika-Arm to Airlite.pdf|How to Connect Mika-Arm to my mixing desk]] |
| \\ | \\ |
| * [[http://www.mambanet.org/wiki/dokudata/faq/airence/Akiyama_fdstart.pdf|Akiyama Faderstart]] | * [[http://www.mambanet.org/wiki/dokudata/faq/airence/Akiyama_fdstart.pdf|Akiyama Faderstart]] |
