D&R Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Airlab support page =====

^  Model:  ^^  Production year  ^
|  Airlab MK2  ||  -  |
|  {{:airlab-dt_2x.png?200|}}  |||
|  [[http://www.mambanet.org/assets/1-airlab-dt-brochure-mail.pdf|Brochure]]  |  [[http://www.mambanet.org/assets/airlab-dt-manual-1.07.pdf|Manual]]  |  -  |


Install all software as Administrator :!: \\
\\
In order to perform an Firmware update you'll need to set the unit in bootloader mode :!: \\
To set the unit in bootloader mode:
  - Take off the Power off the unit
  - Hold down the "Encoder" of the " {{:supairlab:control_section_small.jpg?linkonly|Control surface}} " or the " {{:supairlab:airlabbootloader_button.jpg?linkonly|Bootloader button}} " that is placed at board side of the Master
  - While holding down the "Encoder" you'll have to "Power on" the unit
  - Release the "Encoder" after 5 seconds
  - The Unit will show some random LED's as there is no software loaded at this moment
\\
If you receive a Error 740, it means that it requires elevation to run.\\
Meaning you must run it as administrator.\\
Try right clicking the command prompt and running it as administrator.\\
\\
^  Needed Software  ^  Windows 7 {{:compatibility-windows-7.jpg?80|}}  ^  Windows 8 {{:compatibility-windows-8.jpg?80|}}  ^  Windows 10 {{:compatibility-windows-10.jpg?80|}}  ^  Windows 11 {{:compatibility-windows-11.jpg?80|}}  ^  MAC OS X {{:compatibility-mac.jpg?80|}}  ^  Linux\\ {{:compatibility-linux.jpg?90|}}  ^  Manual\\ & Info  ^
|  Firmware Updatetool  |  [[http://www.mambanet.org/wiki/dokudata/software/D&R Firmware Update Tool v4.11.0 - Setup.exe| v4.11.0]]  (Needs Java 32bits, Visual Studio and driver!)  ||||  N/A  |  N/A  |  [[http://www.mambanet.org/wiki/dokudata/software/Firmware Update v4.1.pdf|PDF]]  |
|  AtLibUsbDfu.dll installer\\ <sub>(Needed for Firmware update tool)</sub>  |  [[http://www.mambanet.org/wiki/dokudata/software/driver-atmel-installer-x86-7.0.1931.msi|Driver X86]]\\ [[http://www.mambanet.org/wiki/dokudata/software/driver-atmel-installer-x64-7.0.1931.msi|Driver X64]]\\ or   [[https://youtu.be/oWNRIsJQvCk|Video AtLibUsbDfu.dll]] <sub>-> Shown as Unknown Device !</sub>  ||||  -  |  -  |  -  |
|  Java 32 bits\\ <sub>(Needed for Firmware update tool) (A)</sub>  |  [[https://javadl.oracle.com/webapps/download/AutoDL?BundleId=238726_478a62b7d4e34b78b671c754eaaf38ab|Java X86]]  ||||  -  |  -  |  -  |
|  Visual Studio\\ <sub>(Needed for Firmware update tool) (B)</sub>  |  [[http://www.mambanet.org/wiki/dokudata/software/visual-studio-isolated-shell-14.0.23107.10.exe|Visual Studio]]  ||||  -  |  -  |  -  |
|  Airlab (Airence) Firmware  |  [[http://www.mambanet.org/wiki/dokudata/software/airence_firmware_v1.5.zip| v1.5]]  ||||  -  |  -  |  [[http://www.mambanet.org/wiki/dokudata/software/Airence Changelog.txt|TXT ]]  |
|  Airlab Meters  |  [[http://www.mambanet.org/wiki/dokudata/software/Airlab Meters v1.9.1 - Setup.exe|v1.9.1]]\\ <sub>(FW 1.5)</sub>  ||||  [[http://www.mambanet.org/wiki/dokudata/software/Airlab Meters v1.7.dmg  | - | v1.7 (FW 1.5)]]  |  [[http://www.mambanet.org/wiki/dokudata/software/Manual Airence Meters.pdf|PDF]]\\ [[http://www.mambanet.org/wiki/dokuwiki/doku.php?id=airencemeters:start| Wiki ]]  |
|  Airlab Meters\\ Serial port driver  |  [[http://www.mambanet.org/wiki/dokudata/software/CDM_v2_12_28_WHQL_Certified_X86_X64.zip|FTDI Driver X86/X64]]  ||||  -  |  -  |  -  |
|  Airlab Control Center  |  [[http://www.mambanet.org/wiki/dokudata/software/Airlab Control Center v3.1 - Setup.exe|v3.1]]  ||||  -  |   -  |  -  |
^  Optional Software  ^  Windows 7  ^  Windows 8  ^  Windows 10  ^  Windows 11  ^  MAC OS X  ^  Linux  ^  Manual\\ & Info  ^
|  Airlab Virtual Keyboard Mapper\\ <sub>(Service)</sub>  |  [[http://www.mambanet.org/wiki/dokudata/software/Airlab Virtual Keyboard Mapper v1.4 - Setup.exe| v1.4 (FW 1.5)]]  ||||  -  |  -  |  [[http://www.mambanet.org/wiki/dokudata/software/Manual Airlab Virtual Keyboard Mapper.pdf|PDF]]  |
|  D&R VoIP Connect Button  |  [[http://www.mambanet.org/wiki/dokudata/software/D&R Voip Connect v1.0.229.0 - Setup.exe|v1.0.229.0]]  ||||  -  |  -  |  [[http://www.mambanet.org/wiki/dokudata/software/Voip connect.pdf|PDF]]  |
|  Channel Configuration  |  -  ||||  -  |  -  |  [[https://www.youtube.com/watch?v=1mD7JKfRlD0| Video]]  |
|  USBdeview  |  [[http://www.mambanet.org/wiki/dokudata/software/USBstopALLD&R.zip| Remove all D&R .bat file]]\\ <sub>(Copy to USBdeview folder)</sub>  ||||   -  |   -  |  [[https://www.nirsoft.net/utils/usb_devices_view.html|Nirsoft (C)]]  |
|  Airence SDK\\ <sub>(CONTROL SURFACE ONLY!)</sub>  |  [[http://www.mambanet.org/wiki/dokudata/software/Airence SDK v1.2.zip| v1.2]]  ||||  -  |  -  |  [[http://www.mambanet.org/wiki/dokudata/software/Airence C library v1.2.pdf|PDF]]  | 
^  The Airlab mux EEPROM file can only be upgraded with the use of an EEPROM programmer and empty M27C512 EEPROM I.C.!\\ You can also order a replacement EEPROM at our sales department.  ^^^^^^^^
|  Airlab Mux EEPROM  |  [[http://www.mambanet.org/wiki/dokudata/software/Airlab Firmware v2.04.zip| v2.04]]  ||||  -  |  -  |  -  |
\\
(For the Airlab the AtLibUsbDfu.dll device in the device manager is shown as “Unknown Device”)\\
\\
(A) NOTE: This application requires JAVA 32-bits to be installed. Please download and install the latest version first :!: \\
\\
(B) NOTE: Some users still receive the error message: Firmware update failed! Make sure console is connected and in bootloader mode, they are probably missing the Microsoft Visual Studio drivers :!: \\
\\
-----
\\
====== FAQ - Airlab ======
\\
===== Software and Settings =====
\\
^**__Question:__** It isn't possible to change settings of my Airlab, the Airlab won't accept/apply my settings?^
|**__Answer:__** Link: [[EnableSetup:start|please follow the steps at this link]]|  
\\
^**__Question:__** My firmware update isn't working?^
|**__Answer:__** Link: [[nwfwupdateenc:start|please follow the steps at this link]]|
\\
^**__Question:__** How do I setup Aircast to work with my Airlab?^
|**__Answer:__** Link: [[aircastairlab:start|please follow the steps at this link]]|
|[[http://www.mambanet.org/wiki/dokudata/faq/airlab/Aircast+Airlab.pdf|Airlab as remote control in Aircast]]|
\\
^**__Question:__** My Airlab (Airence) meters aren't working?^
^**__Question:__** How can I forward the meter information trough network?^
|**__Answer:__** Link: [[airencemeters:start|please follow the steps at this link]]|
\\
^**__Question:__** My Meter software shows a distorted screen, what can be the problem?^
|**__Answer:__** Link: [[meterdistorted:start|please follow the steps at this link]]|
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/AIRLAB METER APPLICATION WITH REMOTE PC.pdf|Airlab Meter Application with remote PC]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Airlab Programmming settings English.pdf|Airlab Programmming Settings]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/AIRLAB SET UP HELP.pdf|Airlab Select functions not working]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Missing connection between Virtual Keyboard mapper AIRLAB and AIRCAST.pdf|Missing connection between Virtual Keyboard Mapper Airlab and Aircast]]
\\
-----
\\
===== USB =====
\\
^**__Question:__** What bit and sample rate settings are supported by the soundcards?^
|**__Answer:__** The soundcards in our mixers support 16 bit 32kHz, 16 bit 44kHz and 16 bit 48kHz|
\\
^**__Question:__** My USB Channel or other USB hardware isn't recognized, what should I do?^
^**__Question:__** When connecting the USB, I receive a message that the maxmimum services or end points are reached. How can I fix this?^
|**__Answer:__** Link: [[usbnotworking:start|please follow the steps at this link]]|
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airence/USB Cable Length Limitations.pdf|USB Cable Length Limitations]]
\\
^**__Question:__** Can I connect one of the four inserted or an extra USB channel to a seperate computer?^
|**__Answer:__** Link: [[http://www.mambanet.org/wiki/dokudata/faq/airlab/How to connect USB channels to a separate computer.pdf|please follow the steps at this link]]|
\\
-----
\\
===== Microphone input ====
\\
^**__Question:__** How can I connect My mixer with Insert to a effects unit?^
|**__Answer:__** See this picture:|
|{{:insert_connections.jpg?200|}}|
\\
-----
\\
===== Telco or Voip =====
\\
^**__Question:__** How to use the Voip channel in my mixer?^
|**__Answer:__** [[howtovoip:start|please follow the steps at this link]]|
\\
^**__Question:__** How do I connect my Airlab to the RJ-11 of my phone line?^
|**__Answer:__** You'll have to order or solder a cable from XLR to RJ-11 like this schematic {{ :supairlab:xlr_to_phone_-_airlab_mkii.gif?direct |}}. They can be ordered here : [[https://www.markertek.com/product/hk-116m/phone-jack-adapter-rj11-female-to-male-xlr?hk-116m&utm_referrer=http%3a%2f%2faudio-video-supply.markertek.com%2fsearch%3fts%3dm%26w%3dphone-jack%2520adapter%2520rj11%2520female%2520to%2520male%2520xlr%26isort%3dscore%26method%3dand%26utm_referrer%3ddirect%2fnot%2520provided|{{ :supairlab:xlr_male_to_rj11_converter.jpg?direct }}]]|
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/2-Airlab TELCO control partnumbers.pdf|Airlab TELCO control partnumbers]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Airlab N-1 and RC balance adjustments on location.pdf|Airlab N-1 and RC balance adjustments on location]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/ALIGNMENT OF N-1.pdf|Alignment OF N-1]]
\\
\\
^**__Question:__** The incomming sound (Microphone) of my Voip channel isn't working, how can I solve this?^
|**__Answer:__** Microsoft is changing the Privacy settings to prevent for hacking in to the Microphone sound and listen to what you are saying. Check these settings:|
|{{:supairence:voipmicnosound.png?600|}}|
\\
-----
\\
===== On Air, Mic on, Fader start, GPO =====
\\
^**__Question:__** I want to connect my Fader start to my CD player, Turntable or other player, how do I have to connect this?^
|**__Answer:__** Instructions can be found in this webpage: [[faderstartinstr:start|Fader start instructions]]|
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlite/How to Connect Mika-Arm to Airlite.pdf|How to Connect Mika-Arm to my mixing desk]]
\\
^**__Question:__** Do you have an SDK for the Airlabs Fader Starts that can be received trough RS232 / Com port?^
^**__Question:__** How can I receive the fader starts at the computer side if my software doesnt have a plugin?^
|**__Answer:__** Link: [[AirlabFaderStart:start|please follow the steps at this link]]|
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Onair-to-Airlab.pdf|How to connect a on air light to a Airlab]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/ONAIR_Relay_Memo.pdf|On-Air Relay Memo]]
\\
-----
\\
===== Repair, Modification =====
\\
^**__Question:__** What are the differences in versions?^
|**__Answer:__** Link: [[airlabversion:start|please read the info at this link]]|
\\
^**__Question:__** How should the Flatcables be connected in my Airlab?^
^**__Question:__** My Airlab has missing flatcables, empty connectors is that okay?^
|**__Answer:__** Link: [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Airlab-Master-Wiring.pdf|Airlab MK2 or DT Master wiring]]|
|**__Answer:__** Link: [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Airlab-Master-USB-Wiring.pdf|Airlab DT added USB wiring]]|
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Airlab-DT Block.pdf|Airlab-DT Block diagram]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/1-Airlab triple input control partnumbers.pdf|Airlab triple input control partnumbers]]
\\
  * [[https:/www.mambanet.org/wiki/dokudata/faq/airlab/3-Airlab Master control partnumbers.pdf|Airlab Master control partnumbers]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/AirLab 60B modification to +4dBu meter.pdf|Airlab 60B modification to +4dBu meter]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Airlab Dig Input Installation.pdf|Airlab Dig Input Installation]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Airlab Eprom replacement.pdf|Airlab Eprom replacement]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Airlab-Master Wiring.pdf|Airlab Master Wiring]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/How to replace AIRLAB VU Meter lamps by LEDs.pdf|How to replace Airlab VU Meter lamps by LEDs]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Insert removal on AIRLAB-1E.pdf|Insert removal on Airlab-1E]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/LCD fault and solution.pdf|LCD fault and solution]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Power Adjust Procedure AIRLAB-DT.pdf|Power Adjust Procedure Airlab-DT]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/Switches-pots Airlab.pdf|Airlab Switches-pots]]
\\
  * [[http://www.mambanet.org/wiki/dokudata/faq/airlab/VU meter lamp to LED AIRLAB.pdf|VU meter lamp to LED]]
\\
-----
\\
===== Troubleshooting & Instructions =====
\\
{{youtube>oWNRIsJQvCk}}
  * [[https://youtu.be/oWNRIsJQvCk|D&R firmware update tool message AtLibUsbDfu.dll not found for Airlite, Airence, Airlab, GSM Hybrid]]
\\
{{youtube>1mD7JKfRlD0}}
  * [[https://www.youtube.com/watch?v=1mD7JKfRlD0|D&R USB codec channel configuration for a Airlite, Airence or Airlab]]
\\
[[start:|{{:iconhome.png?100|Home}}]]