Differences

This shows you the differences between two versions of the page.

--- aeronconf:start [2020/06/19 12:07] – created support
+++ aeronconf:start [2020/06/19 12:36] (current) – support
@@ Line 1: / Line 1: @@
+{{:aeron_studio_logo_zonder_teksteffect_2x.jpg?300|}}
 \\
-===== Frequently Asked Questions ======
+^**__Question:__** How do I configure Aeron to work with my Webstation or Airlite?^
-\\
+|**__Answer:__** Link: [[aeronconf:start|please follow the steps at this link]]|
-^**__Question:__** How do I configure Caliope to work with my Webstation or Airlite?^
-|**__Answer:__** Link: [[caliopeconf:start|please follow the steps at this link]]|
 \\
 -----
+\\
+(Click the pictures to enlarge!)\\
+\\
+{{:aeronconf:01.jpg?600|}}\\
+When you start Aeron go to the "Tools" pulldown menu (Red square) and click to open.\\
+\\
+{{:aeronconf:02.jpg?600|}}\\
+Then go to "Preferences" (Red square) and click to open the settings.\\
+\\
+{{:aeronconf:03.jpg?600|}}\\
+Now the "Preferences" page opens and you need to go to "Local" (Red square) and click.\\
+\\
+{{:aeronconf:04b.jpg?600|}}\\
+At the "Local" page you need to go to "Audio" (Blue square) where you'll find the audio settings.\\
+In the "Output routing" (Orange square) you can setup the outputs.\\
+For "Live A / Auto" you select the first USB channel.\\
+For "Live B" you select the second USB channel.\\
+For "Jingle A / E" you select the third USB channel.\\
+For "Jingle B / F" you select the fourth USB channel.\\
+Optional you can setup "Jingle C / G" to play at the Voip channel.\\
+The "VT 1" and "PFL 1" has to be routed to the same USB channel as "Live A".\\
+The "VT 2" and "PFL 2" has to be routed to the same USB channel as "Live B".\\
+The "VT 3" can be routed to the third USB channel.\\
+The "VT 4" can be routed to the third USB channel.\\
+\\
+The VT channels match the tracks in the "Mix editor".\\
+\\
+At the "Input alias and gain" (Purple square) you can configure a name that is easy to recognize for the inputs at the recorders.\\
+\\
+Confirm the settings with "Apply" (Green square).\\
+\\
+{{:aeronconf:05.jpg?600|}}\\
+When you go to "Automation" (Red square) and then to "Extern audio Directsound" (Blue square) you can route an input and output (Purple square) for an external produced program.\\
+\\
+This can also be the input and output of a second sound card.\\
+\\
+{{:aeronconf:06.jpg?600|}}\\
+Your license also activates the options to control Aeron with a D&R product.\\
+To configure this you'll have to go to "Local" (Red square) and then "Airlite / Webstation" (Green square) or "Airence".\\
+Click at "Airlite / Webstation" to open it's setup page.\\
+\\
+{{:aeronconf:07.jpg?600|}}\\
+Now go to "Airlite Control" (Red square) at your taskbar and right click on the icon.\\
+\\
+{{:aeronconf:08.jpg?600|}}\\
+Click at "Settings" to open the "Airlite Control" communication software.\\
+\\
+{{:aeronconf:09.jpg?600|}}\\
+At the "Connection" page (Red square) you'll now need to add the "Host" 127.0.0.1 ip address.\\
+The "Receive port" you'll need the "Custom" port (Purple square) and at the "Send port you'll need the "Listen" port (Blue square).\\
+At Aeron confirm your settings with "Apply" (Green square).\\
+\\
+To be sure that everything works and all the ports are open at the firewall we recommend to restart Aeron.\\
+\\
+{{:aeronconf:10.jpg?600|}}\\
+When you applied your settings you'll see that the "Status" (Red square) will say "Connect" and "Driver" will say "Airlite Library v.1.1.133.0 - xxxx-xx-xx (xx:xx:xx) - D&R".\\
+At the "Firmware" line it should tell you the installed firmware version "D&R Airlite Firmware v1.xx".\\
+\\
+This tells you that the connection works both ways.\\
+\\
+Now at "Live assist" (Blue square) you can select the channels that are used for "Live A" and "Live B".\\
+And at "Jingle player" (Purple square) you can select the channels that are used for "Jingle A", "Jingle B", "Jingle C" and "Jingle D" players.\\
+\\
+Confirm your settings with "Apply" (Green square).\\
+\\
+{{:aeronconf:11.jpg?600|}}\\
+To change the Jingle (Cart players) from 4 players to 2 click at the Jingle plater name bar (Red square) to open the pull down menu.\\
+\\
+{{:aeronconf:12.jpg?600|}}\\
+At the "Carts count" you can now select "2" or "4" players, Apply with "Enter".\\
+\\
+{{:aeronconf:13.jpg?600|}}\\
+The 2 "Jingle" players now match "A" and "B" row at the control surface.\\
+Keys "1" to "7" are the cart numbers in Aeron and "8" will "stop" the players.\\
+\\
+The selected cart player will also start with the fader start of the matching fader.\\
+\\
+\\
+All settings can be changed and tweaked to meet your own desires.\\
 \\
 [[start:|{{:iconhome.png?100|Home}}]][[playoutoftware:start|{{:iconback2.png?100|Back}}]][[aeron:start|{{:iconback1.png?100|Back}}]]