Differences

This shows you the differences between two versions of the page.

--- caliopeconf:start [2020/06/04 14:45] – created support
+++ caliopeconf:start [2020/06/12 11:30] (current) – support
@@ Line 1: / Line 1: @@
+{{:caliope.png?300|}}
 ^**__Question:__** How do I configure Caliope to work with my Webstation or Airlite?^
 |**__Answer:__** Link: [[caliopeconf:start|please follow the steps at this link]]|
@@ Line 5: / Line 6: @@
 \\
 {{:caliopeconf:01.jpg?600|}}\\
+Press at the gears icon (Red square) to open the settings pull down menu.\\
 \\
 {{:caliopeconf:02.jpg?600|}}\\
+Press at "Config" to enter the configuration screen.\\
 \\
 {{:caliopeconf:03.jpg?600|}}\\
+Activate the "Use separate channel for auto play" function and choose channel 4 as this is the non stop channel of an Airlite (Webstation Ch. 3).\\
+Configure the Audio devices for the channels (Red square) and press "Add cart", assign a desired channel for the cartwall.\\
+Apply with "OK"\\
 \\
 {{:caliopeconf:04.jpg?600|}}\\
+Now you have to press the gear icon (Red square) again and press "Equipment" (Red square) to enter the Remote control configuration.\\
 \\
 {{:caliopeconf:05.jpg?600|}}\\
+Press "Add Equipment" (Red square).\\
 \\
 {{:caliopeconf:06.jpg?600|}}\\
+A new venster opens, press the pulldown menu (Red square).\\
 \\
 {{:caliopeconf:07.jpg?600|}}\\
+Select your mixing console (Red square), in this example an Airlite and then in press "Test Connection" to see if data comes trough.\\
 \\
 {{:caliopeconf:08.jpg?600|}}\\
+A new venster opens to check the connection.\\
+Probbaly it will only say "Connecting with equipment".\\
+\\
+You'll need to restart Caliope to make your "Equipment" active!\\
 \\
 {{:caliopeconf:09.jpg?600|}}\\
+After you restarted Caliope press the Gear icon followed by "Equipment".\\
+Select the name of your mixer (Red square) and press "Config Equipment".\\
+Then "Test connection".\\
 \\
 {{:caliopeconf:10.jpg?600|}}\\
+Now you will see the Received commands and they will change when you move faders.\\
+Press "OK to apply.\\
+\\
+{{:caliopeconf:09.jpg?600|}}\\
+Now press "Edit".\\
 \\
 {{:caliopeconf:11.jpg?600|}}\\
+A new venster opens where you can configure the actions.\\
+Press "Add Action" and add all desired actions to control Caliope with your mixer.\\
 \\
+[[start:|{{:iconhome.png?100|Home}}]][[playoutoftware:start|{{:iconback2.png?100|Back}}]][[caliope:start|{{:iconback1.png?100|Back}}]]