Differences

This shows you the differences between two versions of the page.

--- faderstartinstr:start [2019/06/07 14:23] – support
+++ faderstartinstr:start [2020/06/12 11:36] (current) – support
@@ Line 1: / Line 1: @@
 **__Question:__** I want to connect my Fader start to my CD player, Turntable or other player, how do I have to connect this?\\
 **__Answer:__** Instructions can be found in this webpage: [[faderstartinstr:start|Fader start instructions]]\\
+\\
+\\
 \\
 **On this wiki page we are going to explain what steps to take to connect the Fader start (GPO) of your mixer to a CD Player, Turntable or other player.**\\
@@ Line 22: / Line 24: @@
 {{ :faderstartinstr:start_cable.jpg?direct |}}
 \\
-A simple way to test how your equipment Starts and or Stops is to take a metal tweezer or plier and first shortly connect each of the options above.\\
+A simple way to test in which way your equipment Starts and/or Stops is to take a metal tweezer or plier and first shortly connect each of the options above.\\
 \\
 If you found a connection that starts your equipment and it keeps playing write down this option and test if it stops when the same action is done or find the other connection.\\
 This options are the Pulse start and or stop.\\
 \\
-When your equipment hidded play for a short moment test to connect this option for a longer period.\\
+When your equipment hits play for a short moment you'll have to test and connect this option for a longer period.\\
 This option will be the Continous start and stop.\\
 \\
+-------
 \\
-**Our mixers provide a Potential free switch contact at their GPO**\\
+**Now your information translated to our mixers.**\\
 \\
-**Be sure to always use a stereo jack!**\\
+**Our mixers provide a Potential free switch contact at their GPO**\\
 \\
 Our newer mixers can only provide a contact between the Tip and Ring of the GPO Jack due to the use of an Opto Coupler.\\
@@ Line 41: / Line 44: @@
 {{ :faderstartinstr:connector_old_type.png?direct |}}
 \\
-__***UNDER CONSTRUCTION***__
+In most situations a cable has to be soldered with the original lead at your equipments side and a stereo jack at the mixer's side.\\
+\\
+{{ :faderstartinstr:connections.png?direct |}}
+\\
+**Be sure to always use a __stereo jack__ at the mixers side!**\\
+\\
+**Fader start instructions:**\\
+[[faderstartAirence:start|Airence]]\\
+[[faderstartAirlab:start|Airlab]]\\
+[[faderstartAirlite:start|Airlite]]\\
+[[faderstartAirmate:start|Airmate]]\\
+[[faderstartAxum:start|Axum]]\\
+[[faderstartLyra:start|Lyra]]\\
+\\
+[[start:|{{:iconhome.png?100|Home}}]]