Differences

This shows you the differences between two versions of the page.

--- proppfrexxconf:start [2020/05/29 14:58] – created support
+++ proppfrexxconf:start [2020/06/12 11:28] (current) – support
@@ Line 3: / Line 3: @@
 |**__Answer:__** Link: [[proppfrexxconf:start|please follow the steps at this link]]|
 \\
-{{:proppfrexxconf:01.jpg?600|}}
+This is a simple instruction to configure Proppfrexx with an Airlite and Webstation.\\
 \\
-{{:proppfrexxconf:02.jpg?600|}}
+Because the Webstation is the smaller brother of the Airlite the configuration is pretty much the same.\\
+The only difference is the amount of channels and functions.\\
+Both mixers communicate between it's Control software and the Meters, Configuration tool and Remote tools trough different ports.\\
 \\
-{{:proppfrexxconf:03.jpg?600|}}
+^**__Question:__** My software (Meters, Configuration manager, Playout software) doen't seem to connect with my mixer?^
+^Communication doesn't seem to work because the Ports seem te be blocked.^
+|**__Answer:__** Link: [[ports:start|please follow the steps at this link]]|
 \\
-{{:proppfrexxconf:04.jpg?600|}}
+Settings can be changed to your own needs.\\
 \\
-{{:proppfrexxconf:05.jpg?600|}}
+{{:proppfrexxconf:01.jpg?600|}}\\
+First go to "Tools"\\
 \\
-{{:proppfrexxconf:06.jpg?600|}}
+{{:proppfrexxconf:02.jpg?600|}}\\
+Go to "General Settings"\\
 \\
-{{:proppfrexxconf:07.jpg?600|}}
+{{:proppfrexxconf:03.jpg?600|}}\\
+Choose "Input/Output" to configure the available soundcards.\\
 \\
-{{:proppfrexxconf:08.jpg?600|}}
+{{:proppfrexxconf:04.jpg?600|}}\\
+In the red square you have to add all the Proppfrexx outputs which are the inputs of your mixer.\\
+In the blue square you have to add all the Proppfrexx inputs which are the outputs of your mixer.\\
 \\
-{{:proppfrexxconf:09.jpg?600|}}
+{{:proppfrexxconf:05.jpg?600|}}\\
+First add the first USB Audio codec as a sound card.\\
 \\
-{{:proppfrexxconf:10.jpg?600|}}
+{{:proppfrexxconf:06.jpg?600|}}\\
+Add the second USB Audio codec as a sound card.\\
 \\
-{{:proppfrexxconf:11.jpg?600|}}
+{{:proppfrexxconf:07.jpg?600|}}\\
+Repeat until all the USB Audio codec are added.\\
 \\
-{{:proppfrexxconf:12.jpg?600|}}
+{{:proppfrexxconf:08.jpg?600|}}\\
+Add in first input device.\\
 \\
-[[proppfrexxconf2:start|please follow the steps at this link]]
+{{:proppfrexxconf:09.jpg?600|}}\\
+Add in second input device.\\
+\\
+{{:proppfrexxconf:10.jpg?600|}}\\
+Repeat until all the USB Audio codec are added.\\
+\\
+{{:proppfrexxconf:11.jpg?600|}}\\
+When finished id looks like this.\\
+\\
+{{:proppfrexxconf:12.jpg?600|}}\\
+At the "Routing" tab you can link each Player to an Proppfrexx output.\\
+You can also route the Cartwall etc.\\
+\\
+For example at the "Streaming" tab settings you can add a Proppfrexx input (Mixer output) to stream the Program bus.\\
+\\
+[[start:|{{:iconhome.png?100|Home}}]][[playoutoftware:start|{{:iconback2.png?100|Back}}]][[proppfrexx:start|{{:iconback1.png?100|Back}}]][[proppfrexxconf2:start|{{:iconforw.png?100|please follow the steps at the second page}}]]