User Tools

Site Tools


axumaes67usb:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
axumaes67usb:start [2019/08/07 13:15] supportaxumaes67usb:start [2022/07/18 09:17] (current) support
Line 6: Line 6:
 \\ \\
 ==== The "AES67/USB card" will only work completely in 16 channel slots of the Axum rack positioned between the DSP card and the Rack ETX. ==== ==== The "AES67/USB card" will only work completely in 16 channel slots of the Axum rack positioned between the DSP card and the Rack ETX. ====
 +\\
 +==== In units produced after 05-05-2021 the AES67/USB card will work from slot 12 and higher due to a firmware update. ====
 \\ \\
 ----- -----
Line 73: Line 75:
 \\ \\
 \\ \\
-[[https://www.d-r.nl/support-request.html|Support Request]]\\+------ 
 +\\ 
 +==== How to use 2x AES67/USB card both in USB mode. ==== 
 +\\ 
 +Connect both AES67/USB cards with a network cable to your network.\\ 
 +\\ 
 +You'll need to download Putty to be able to make a Telnet connection for setting the Synchronization mode!\\ 
 +\\ 
 +[[https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html|Putty download page]]\\ 
 +\\ 
 +You also need to download this windows script by "Save link as".\\ 
 +\\ 
 +[[http://www.mambanet.org/wiki/dokudata/faq/axum/AES67USB Telnet Putty Script.wsf|AES67USB Telnet Putty Script]]\\ 
 +\\ 
 +\\ 
 +{{:axumaes67usb:2xusb1.png?direct|}} 
 +\\ 
 +First set both cards Word Clock enabled to "0" (OFF), and "AES67-USB-Streaming-Interface" to "1" (USB mode).\\ 
 +\\ 
 +\\ 
 +{{:axumaes67usb:2xusb2.png?direct|}} 
 +\\ 
 +Set the Word Clock to the "Axum MambaNet Gateway".\\ 
 +\\ 
 +Find out which IP Addresses your AES67/USB cards have, edit the script file to change the IP address and run the script file.\\ 
 +\\ 
 +Also change the IP address for the second card and run the script file.\\ 
 +\\ 
 +Reboot the system!\\ 
 +\\ 
 +\\ 
 +Both cards now work with the Word Clock of the Axum system and are able to play and record without glitches.\\ 
 +\\ 
 +\\ 
 +We are still working on a solution to be able to work both cards in AES67 mode without glitches!\\ 
 +\\ 
 +------ 
 +\\ 
 +\\ 
 +[[https://www.dnrbroadcast.com/support-related|Support Request]]\\
 \\ \\
-Go back to the [[SupAxum:start|Axum]] support page.\\+[[start:|{{:iconhome.png?100|Home}}]][[SupAxum:start|{{:iconback2.png?100|Back}}]]
 \\ \\
  
axumaes67usb/start.1565176531.txt.gz · Last modified: 2019/08/07 13:15 by support