Table of Contents

Airmate support page

Model: Production year
Airmate-USB -
Brochure Manual -
- Manual French -

FAQ - Airmate-USB 8 and 12 channel

Needed software (Install as Administrator):

Needed Software Windows 7 Windows 8 Windows 10 Windows 11 MAC OS X Linux
Manual
& Info
D&R VoIP Connect Button v1.0.229.0 - - PDF
Channel Configuration - - - Video
USBdeview Remove all D&R .bat file
(Copy to USBdeview folder)
- - Nirsoft (C)




USB


Question: What bit and sample rate settings are supported by the soundcards?
Answer: The soundcards in our mixers support 16 bit 32kHz, 16 bit 44kHz and 16 bit 48kHz


Question: My USB Channel or other USB hardware isn't recognized, what should I do?
Question: When connecting the USB, I receive a message that the maxmimum services or end points are reached. How can I fix this?
Answer: Link: please follow the steps at this link


Question: My Airmate is still with the previous USB configuration and they both receive the Program bus. Can they also receive the Auxilary send? How can I fix this?
Answer: Link: please follow the steps at this link








Microphone input



Question: How can I connect My mixer with Insert to a effects unit?
Answer: See this picture:




Telco or Voip


Question: What are the Telephone Hybrid and Voip channel options and what can I connect to them?
Answer: Take a look at this picture:


Question: How can I connect a (GSM) Hybrid to my Voip channel?
Answer: Connect the output from the Hybrid to the input of the Voip channel and the Cleanfeed output to the input of your Hybrid. Therefor you need to make a cable from the RJ11 connector to input connector on your hybrid:


Question: How to use the Voip channel in my mixer?
Answer: please follow the steps at this link










Question: How do I connect a Hybrid 1 to my mixer?
Answer: Follow the instructions in this .pdf document: How to connect a Hybrid1



Question: The incomming sound (Microphone) of my Voip channel isn't working, how can I solve this?
Answer: Microsoft is changing the Privacy settings to prevent for hacking in to the Microphone sound and listen to what you are saying. Check these settings:




On Air light, Mic on, Fader start, GPO


Question: I want to connect my Fader start to my CD player, Turntable or other player, how do I have to connect this?
Answer: Instructions can be found in this webpage: Fader start instructions













Repair and Modification


Question: What are the differences in versions?
Answer: Link: please read the info at this link


Question: How can I replace or repair a board in an Airmate?
Answer: Link: please read the info at this link












Other






Home