This is an old revision of the document!
Table of Contents
Question: How do I configure the AES67 / USB card?
Answer: Link: follow the instructions on this page.
Because the "AES67/USB card" is developed recently it's settings aren't available for "Import" at the "Rack configuration".
There for the settings need to be added manually.
The "AES67/USB card" needs to be the "Word Clock" for the system.
If the “Word Clock” is provided by a different card like for example the “Fire Wire card” the audio will be distorted.
This is why the “AES67/USB card” and the “Fire Wire card” can't be used together in one system.
You can set the “AES67/USB card” to be “Word Clock” by clicking it's dot under “WC” at the “Rack configuration”.
First configure the outputs of the “AES67/USB card”.
Then configure the Inputs of the “AES67/USB card”.
The “AES67-USB-in-x-Level” has to be set to “-18” for the best results and can be tweaked afterwards.
The “AES67-USB-out-x-Level” has to be set to “15” for the best results and can be tweaked afterwards.
The AES67 / USB card can only work in one mode at a time.
When you set the “AES67-USB-Streaming-Interface” setting to “0” it will activate the “AES67” function.
When you set the “AES67-USB-Streaming-Interface” setting to “1” it will activate the “USB” function.
Support Request
Go back to the Axum support page.