User Tools

Site Tools


axumaircast:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
axumaircast:start [2019/07/19 16:34] – created supportaxumaircast:start [2022/07/18 09:19] (current) support
Line 17: Line 17:
 \\ \\
 When you apply the Aircast node will show in the __Register information__ page of the Axum as __Test Name__\\ When you apply the Aircast node will show in the __Register information__ page of the Axum as __Test Name__\\
 +\\
 +{{ :axumaircast:axum_en_aircast_4.png?direct |}}
 +\\
 +This node can be renamed to Aircast.\\
 +\\
 +{{ :axumaircast:axum_en_aircast_5.png?direct |}}
 +\\
 +When you go to __Surface configuration__ you'll find the Aircast node.\\
 +\\
 +{{ :axumaircast:axum_en_aircast_6.png?direct |}}
 +\\
 +When you press the __configure__ button you'll see the empty function list for this node.\\
 +\\
 +{{ :axumaircast:axum_en_aircast_7.png?direct |}}
 +\\
 +Now you can configure the Actuators that will trigger the 16 virtual busses that will go to Aircast.\\
 +\\
 +So when you for example configure __Module x: Fader on__ the Axum will send a trigger to Aircast when that fader is going from off to on.\\
 +\\
 +{{ :axumaircast:axum_en_aircast_8.png?direct |}}
 +\\
 +Now at the Aircast __Control Panel__ in the __D&R Axum (Mambanet)__ at the __Commands__ tab you can configure for each Actuator what the function needs to be when the Axum sends it's trigger.\\
 \\ \\
 \\ \\
 {{ :axumaircast:axum_en_aircast.png?direct |}} {{ :axumaircast:axum_en_aircast.png?direct |}}
 \\ \\
 +Multiple functions can be configured this way.\\ 
 +\\ 
 +[[https://www.dnrbroadcast.com/support-related|Support Request]]\\ 
 +\\ 
 +[[start:|{{:iconhome.png?100|Home}}]][[SupAxum:start|{{:iconback2.png?100|Back}}]] 
 +\\
axumaircast/start.1563546896.txt.gz · Last modified: 2019/07/19 16:34 (external edit)